The BuckHook™ system is ideal for users in the Tower and Substation field, this system uses a shepherd’s hook attached to a fiberglass pole to fit over angle irons. Users will attach a lifeline with a rope grab to the head of the BuckHook™ and then attach a rope grab to oneself to give the user fall protection.

The BuckHook™ KIT includes all the components necessary for a “First man up” to have all the safety and fall protection needed to make a safe ascent. The Kit Includes:

• BuckHook™ (50371U)
• Offers fall protection during ascent and descent.
• LifeLine (39S2Q2)
• A 16ft. Lifeline- 7/16” - 1/2” Semi Static Kernmantle Rope.
• Stitched eye with steel thimble at one end.
• Tight eye with a weighted bag on the other end.
• Mobile Fall Arrestor (5004L3)
• Fits 1/2” & 7/16” Kernmantle rope.
• Made of Light aluminum alloy.
• Rolling Cam for better braking.
• The device moves freely during ascent and descent but locks up in the event of a fall.
• Comes with Steel ANSI rated triple action carabiner.
• Kit Carry Bag (45400R2-18)

Easy Steps for using the BuckHook™ system:

1. Attach a short lifeline and mobile fall arrestor to the sternal attachment on the harness. For connecting lanyards longer than 12" a shock pack should be attached to the dorsal attachment.
2. Using the extension pole with BuckHook™ and 7/16" or ½" non-stretch rope attached, lift and secure hook onto lattice so that the end of the pole is below foot level.
3. Once in place, climb up near BuckHook™.
4. Secure secondary positioning lanyard around the tower leg. Once secure, move BuckHook™ to the next highest point making sure the end of the pole is below the users feet.
5. Once at the worksite user should secure an anchor sling to a suitable anchorage point. The primary vertical lifeline can then be attached to the anchor sling.
6. Once the lifeline is installed, other climbers can connect their harness to a mobile fall arrester and ascend and descend the lifeline.

Videos:

Product Name: Utility Equipment Bag
Color: Red
Diameter: 9.5″ / (5″ for 9″ Length)
Length: 18"
Weight: 0.78 lbs.
Number of Pockets: 0
Outside Pockets: 0
Inside Pockets: 0
Pocket Material: N/A
Material: Water Resistant Polyester
2 Way Snap: No
Rain Flap: No
Back Straps / Shoulder Straps: No
Handles: 1″ Nylon Web Handles
Closure Tab: Zipper
Bottom Material: Water Resistant Polyester


Product Number: 39S2Q2-16
Product Name: Lifeline
Overall Length: 16′
Number of Legs: 0
Material Type: Rope
Material: 7/16″ – 1/2″ Semi Static Kernmantle
Adjustable: No
Protector: No
Protector Type: N/A
Red Wear Center: Yes
Ring Material: N/A
Number of Eyes: 2 (1 eye, 1 stitched with thimble)
Throwbag: Yes
Weight: 2.5 lbs
Standards: OSHA 1926.502


Product Number: 5005
Product Name: Auto Lock Steel Carabiner with 3600 l
Overall Length: 24″
Number of Legs: N/A
Material Type: Nylon Web
Adjustable: No
Protector: No
Protector Type: N/A
Red Wear Center: No
Ring Material: N/A
Weight: 0.2 lbs.


Product Number: 5555S4
Weight: 3.7 oz
Length: 5 5/8″
Width: 3″
Material: Aluminum
Diameter of Eye: No Eye
Gate Opening Capacity: 0.63″
Gate Strength: 3596 lbs (16Kn)
Breaking Strength: 6744 lbs
Standards Met: ANSI Z359.12


Product Number: 400000X12
Product Name: BUCKSORBER2™
Material: Navajo / Kevlar
Closure Type: Hook & Loop
User Weight Rating: 350 lbs. fully equipped
2 Person Load Rating: 620 lbs.
Max Length: 6
Max Length w/ Fall Arrester: 1.5
Standards: Meets or exceeds all applicable requirements of ANSI Z359.13 – 6ft and 12ft free fall, ASTM F887 standards OSHA 1926.502 and 1926.954 regulations.


Product Number: 5004L1
Product Name: ASAP Lock
Length: 5.51 in
Width: 3.74 in
Weight: 1.14 lbs
Designed For: Vertical or Angled Rope, 10-13 mm
Material: Aluminum, Stainless Steel & Nylon


Product Number: 5004L4
Product Name: Mobile Fall Arrestor Lock w/ BUCKSORBER2™


Product Number: 50371U
Product Name: BuckHook
Hook Opening: 7"
Material: Steel
Tensile Strength: 5,000 lbf.
Length: 19"
Width: 3.5"
Weight: 3.4 lbs
Connector Type: Universal